Tall Fridge/Freezer Housing


Fitting Guide


Again, this has been designed to accommodate various standard fridges on the market.


You will need to remove the temporary back for ventilation purposes and the doors and cross rail have not been fitted as these will be fitted to your fridge and freezer. In most cases the centre rail will be dowelled to the lower door and this will be the point where the fridge/freezer splits. In some cases you may wish to dowel the rail to the upper door and in some circumstances where you are just fitting a one door fridge/freezer it is intended that the rail is dowelled to both the top and the bottom door (forming one door) and we would recommend that you show a 2.5mm gap around the rail to give the appearance that these are separate doors.



An extra-long modesty panel has been provided which will need to be cut down to close the top of the fridge housing. Some people prefer to put a shelf over the top of the fridge so that you have a little bit more storage rather than closing this void. It is important that you follow the manufacturers guidelines for ventilation.